
The Screw Compactor for Greater Requirements
Materials you can compact with the SK240:
EPS
Capacity: up to 75 kg/hour
Compacted density approx. 350 kg/m³
Compacted into stackable blocks
Dust and Airlaid
Capacity: 100-200 kg/hour
Compacted density: 350-800 kg/m³
Compacted into dense, but non-stackable blocks
Packaging and containers
Empty plastic and metal packaging can also be compacted with the SK240. For packaging containing liquids, see our dewatering solutions.
Other materials
Not sure if your material can be compacted? Reach out to us and we’ll find out together.
Capacity and compaction results depend on the material, bulk density, particle size and machine configuration.
One Machine, Different Configurations
The right SK240 configuration depends on the material and how it is handled after the compaction. The machine can be supplied with different feeding systems, pre-crushers or hoppers and equipment for handling the compacted material.
Material can be fed manually through a 45° hopper or by conveyor into a vertical hopper. For larger continuous volumes of certain materials, the SK240 can also be installed below a silo.
Depending on the application, the system can include:
- Different pre-crusher configurations and motor sizes
- Heavy-duty pre-crusher for tough or dense materials
- Silo solution
- Automatic block divider
- Crane for block handling
- Exhaust system for dust
Compacting with the SK240
Depending on the application, the material is fed directly into the compactor or first shredded in a pre-crusher. The screw moves the material towards the hydraulic jaws, where it is compacted under pressure.
Sensors automatically start and stop the machine when they detect material in the hopper.
The output depends on the material. EPS is compacted into dense, stackable blocks, while other materials can be collected in endless bags, big bags or containers.
Warranty
As with the SK200 and SK370, we offer a 2-year warranty or 6000 operation hours, whichever comes first for the machine.
RUNI SK120
Our smallest EPS compactor, suitable for retail and small industrial businesses. It has a capacity of approx. 18 kg per hour and is typically fed manually. It is recommended for an annual volume of less than 10 tons per year. It is available with either automatic or manual jaws.
Read more
RUNI SK200
Our second smallest compactor has a capacity of approximately 45 kg per hour and is typically fed manually. It is recommended for an annual volume of 10 to 30 tons. It is available with either automatic or manual jaws.
Read more
RUNI SK240 - Compaction
The RUNI SK240 screw compactor is the second largest in the RUNI range. It is capable of compacting a wide variety of materials, with capacity and output depending on the specific input.
Read more
RUNI SK240 - Separation
The SK240 is our smallest dewatering machine. Capacity and output depend on the application. The machine can dewater cans, plastic bottles, and Tetra Pak, as well as dry various wet fractions such as rejects and washed PE film.
Read moreCase Studies
Xerox has gained several benefits by compressing their EPS waste: savings on storage space, reduction in waste management costs, and earnings from the sale of compressed EPS blocks.
Read more
At PreZero in the Netherlands, large amounts of dust from demolition waste caused problems for both employees and neighbors. With RUNI screw compactors, the dust is now compacted and bound directly under the filter system — eliminating dust issues once and for all
Read moreContact Us
If you need more information or have questions about RUNI products, please fill out the form below. We will get back to you as soon as possible.
Learn more about our privacy and cookie policy.


Contact US Office
+1 (630) 422-3172
runi-us@runirecycling.com
351 Country Club Drive,
Bensenville, IL 60106






